next up previous contents
Up: Dissertation Grasser Previous: Curriculum Vitae

About this document ...

This document was generated using the LaTeX2HTML translator Version 98.2beta (June 26th, 1998)

Copyright © 1993, 1994, 1995, 1996, Nikos Drakos, Computer Based Learning Unit, University of Leeds.
Copyright © 1997, 1998, Ross Moore, Mathematics Department, Macquarie University, Sydney.

The command line arguments were:
latex2html -no_math -html_version 3.2,math diss.tex

with initialization from: .latex2html-init

# $Id: .latex2html-init,v 1.3 1999/05/04 18:33:22 grasser Exp $
#LaTeX2HTML Version 96.1 : dot.latex2html-init
#
### Command Line Argument Defaults #######################################

$MAX_SPLIT_DEPTH = 8;	# Stop making separate files at this depth

$MAX_LINK_DEPTH = 4;    # Stop showing child nodes at this depth   

$NOLATEX = 0;           # 1 = do not pass unknown environments to Latex

$EXTERNAL_IMAGES = 0;   # 1 = leave the images outside the document 

$ASCII_MODE = 0;        # 1 = do not use any icons or internal images

# 1 =  use links to external postscript images rather than inlined GIF's.
$PS_IMAGES = 0;

$TITLE = $default_title;      # The default is "No Title" 
$TITLE = "Dissertation Grasser";

$DESTDIR = '';         # Put the result in this directory 

# When this is set, the generated HTML files will be placed in the 
# current directory. If set to 0 the default behaviour is to create (or reuse)
# another file directory.
$NO_SUBDIR = 0;


# Supply your own string if you don't like the default  
$ADDRESS = "$address_data[0] 
\n$address_data[1]
"; $NO_NAVIGATION = 0; # 1 = do not put a navigation panel at the top of each page # Put navigation links at the top of each page. If the page exceeds # $WORDS_IN_PAGE number of words then put one at the bottom of the page. $AUTO_NAVIGATION = 1; # Put a link to the index page in the navigation panel $INDEX_IN_NAVIGATION = 1; # Put a link to the table of contents in the navigation panel $CONTENTS_IN_NAVIGATION = 1; # Put a link to the next logical page in the navigation panel $NEXT_PAGE_IN_NAVIGATION = 1; # Put a link to the previous logical page in the navigation panel $PREVIOUS_PAGE_IN_NAVIGATION = 1; $INFO = 1; # 0 = do not make a "About this document..." section # Reuse images generated during previous runs $REUSE = 2; # When this is 1, the section numbers are shown. The section numbers should # then match those that would have bee produced by LaTeX. # The correct section numbers are obtained from the $FILE.aux file generated # by LaTeX. # Hiding the seciton numbers encourages use of particular sections # as standalone documents. In this case the cross reference to a section # is shown using the default symbol rather than the section number. $SHOW_SECTION_NUMBERS = 1; ### Other global variables ############################################### $CHILDLINE = "

\n"; # This is the line width measured in pixels and it is used to right justify # equations and equation arrays; $LINE_WIDTH = 500; # Used in conjunction with AUTO_NAVIGATION $WORDS_IN_PAGE = 300; # Affects ONLY the way accents are processed $default_language = 'english'; # The value of this variable determines how many words to use in each # title that is added to the navigation panel (see below) # $WORDS_IN_NAVIGATION_PANEL_TITLES = 4; # This number will determine the size of the equations, special characters, # and anything which will be converted into an inlined image # *except* "image generating environments" such as "figure", "table" # or "minipage". # Effective values are those greater than 0. # Sensible values are between 0.1 - 4. $MATH_SCALE_FACTOR = 1.6; # This number will determine the size of # image generating environments such as "figure", "table" or "minipage". # Effective values are those greater than 0. # Sensible values are between 0.1 - 4. $FIGURE_SCALE_FACTOR = 1.6; # If this is set then intermediate files are left for later inspection. # This includes $$_images.tex and $$_images.log created during image # conversion. # Caution: Intermediate files can be *enormous*. $DEBUG = 0; # If both of the following two variables are set then the "Up" button # of the navigation panel in the first node/page of a converted document # will point to $EXTERNAL_UP_LINK. $EXTERNAL_UP_TITLE should be set # to some text which describes this external link. $EXTERNAL_UP_LINK = ""; $EXTERNAL_UP_TITLE = ""; # If this is set then the resulting HTML will look marginally better if viewed # with Netscape. $NETSCAPE_HTML = 0; # Valid paper sizes are "letter", "legal", "a4","a3","a2" and "a0" # Paper sizes has no effect other than in the time it takes to create inlined # images and in whether large images can be created at all ie # - larger paper sizes *MAY* help with large image problems # - smaller paper sizes are quicker to handle $PAPERSIZE = "a4"; # Replace "english" with another language in order to tell LaTeX2HTML that you # want some generated section titles (eg "Table of Contents" or "References") # to appear in a different language. Currently only "english" and "french" # is supported but it is very easy to add your own. See the example in the # file "latex2html.config" $TITLES_LANGUAGE = "english"; ### Navigation Panel ########################################################## # # The navigation panel is constructed out of buttons and section titles. # These can be configured in any combination with arbitrary text and # HTML tags interspersed between them. # The buttons available are: # $PREVIOUS - points to the previous section # $UP - points up to the "parent" section # $NEXT - points to the next section # $NEXT_GROUP - points to the next "group" section # $PREVIOUS_GROUP - points to the previous "group" section # $CONTENTS - points to the contents page if there is one # $INDEX - points to the index page if there is one # # If the corresponding section exists the button will contain an # active link to that section. If the corresponding section does # not exist the button will be inactive. # # Also for each of the $PREVIOUS $UP $NEXT $NEXT_GROUP and $PREVIOUS_GROUP # buttons there are equivalent $PREVIOUS_TITLE, $UP_TITLE, etc variables # which contain the titles of their corresponding sections. # Each title is empty if there is no corresponding section. # # The subroutine below constructs the navigation panels in each page. # Feel free to mix and match buttons, titles, your own text, your logos, # and arbitrary HTML (the "." is the Perl concatenation operator). sub top_navigation_panel { # Now add a few buttons with a space between them "$NEXT $UP $PREVIOUS $CONTENTS $INDEX $CUSTOM_BUTTONS" . "
\n" . # Line break # If ``next'' section exists, add its title to the navigation panel ($NEXT_TITLE ? " Next: $NEXT_TITLE\n" : undef) . # Similarly with the ``up'' title ... ($UP_TITLE ? "Up: $UP_TITLE\n" : undef) . # ... and the ``previous'' title ($PREVIOUS_TITLE ? " Previous: $PREVIOUS_TITLE\n" : undef) . # Line Break, horizontal rule (3-d dividing line) and new paragraph "

\n" } sub bot_navigation_panel { # Start with a horizontal rule (3-d dividing line) "


". # Now add a few buttons with a space between them "$NEXT $UP $PREVIOUS $CONTENTS $INDEX $CUSTOM_BUTTONS" . "
\n" . # Line break # If ``next'' section exists, add its title to the navigation panel ($NEXT_TITLE ? " Next: $NEXT_TITLE\n" : undef) . # Similarly with the ``up'' title ... ($UP_TITLE ? "Up: $UP_TITLE\n" : undef) . # ... and the ``previous'' title ($PREVIOUS_TITLE ? " Previous: $PREVIOUS_TITLE\n" : undef) } 1; # This must be the last line

The translation was initiated by Tibor Grasser on 1999-05-31


Tibor Grasser
1999-05-31