next up previous contents
Next: Curriculum Vitae Up: Dissertation Rene Heinzl Previous: Bibliography

Own Publications

  Author Co-Author Total
Conferences 16 21 37
Journals 2 1 3
Book contributions 1 1 2
Total 19 23 42

Book Editorships:

[E1]
W. Benger, R. Heinzl, W. Kapferer, W. Schoor, M. Tyagi, S. Venkataraman, G. Weber (Eds.): Proceedings of the 4th High-End Visualization Workshop. Austria, July 2007, ISBN: 978-3-86541-216-4

Contributions to Books:

[B1]
H. Ceric, R. Heinzl, Ch. Hollauer, T. Grasser, S. Selberherr. Microstructure and Stress Aspects of Electromigration Modeling. Stress-Induced Phenomena in Metallization, American Institute of Physics, Melville, 2006, ISBN: 0-7354-03104, 262 - 268.

Papers in Journals:

[J1]
R. Heinzl, P. Schwaha, and T. Grasser. A High Performance Generic Scientific Simulation Environment. Lecture Notes in Computer Science, Springer, accepted.

[J2]
M. Spevak, R. Heinzl, P. Schwaha, and T. Grasser. A Computational Framework for Topological Operations. Lecture Notes in Computer Science, Springer, accepted.

[J3]
R. Heinzl, P. Schwaha, and S. Selberherr. A Generic Topology Library. Science of Computer Programming, Elsevier, submitted.

Publications in Conference Proceedings:

[P1]
A. Sheikholeslami, E. Al-Ani, R. Heinzl, C. Heitzinger, F. Parhami, F. Badrieh, H. Puchner, T. Grasser, and S. Selberherr. Level Set Method Based General Topography Simulator and its Applications in Interconnect Processes. Intl. Conf. on Ultimate Integration of Silicon, pages 139-142, Bologna, Italy, July 2005.

[P2]
R. Heinzl, M. Spevak, P. Schwaha, and T. Grasser. A Novel Technique for Coupling Three-Dimensional Mesh Adaptation with an A Posteriori Error Estimator. Proc. 2005 PhD Research in Microel. and Elect., pages 175-178, Lausanne, Switzerland, July 2005.

[P3]
A. Sheikholeslami, F. Parhami, R. Heinzl, F. Badrieh, H. Puchner, T. Grasser, and S. Selberherr. Applications of Three-Dimensional Topography Simulation in the Design of Interconnect Lines. Proc. Conf. Sim. of Semiconductor Processes and Devices, pages 187-190, Tokio, Japan, September 2005.

[P4]
P. Schwaha, R. Heinzl, M. Spevak, and T. Grasser. Coupling Three-Dimensinoal Mesh Adaptation with an A Posteriori Error Estimator. Proc. Conf. Sim. of Semiconductor Processes and Devices, pages 235-238, Tokio, Japan, September 2005.

[P5]
R. Heinzl and T. Grasser. Generalized Comprehensive Approach for Robust Three-Dimensional Mesh Generation for TCAD. Proc. Conf. Sim. of Semiconductor Processes and Devices, pages 211-214, Tokio, Japan, September 2005.

[P6]
P. Schwaha, R. Heinzl, W. Brezna, J. Smoliner, H. Enichlmair, R. Minixhofer, and T. Grasser. Fully Three-Dimensional Analysis of Leakage Current in Non-Planar Oxides. 2005 Europ. Sim. and Modeling Conf., pages 469-473, Porto, Portugal, October 2005.

[P7]
E. Al-Ani, R. Heinzl, P. Schwaha, T. Grasser, and S. Selberherr. Three-Dimensional State of the Art Topography Simulation. 2005 Europ. Sim. and Modeling Conf., pages 430-432, Porto, Portugal, October 2005.

[P8]
R. Heinzl, P. Schwaha, M. Spevak, and T. Grasser. Adaptive Mesh Generation for TCAD with Guaranteed Error Bounds. Proc. 2005 Europ. Sim. and Modeling Conf., pages 425-429, Porto, Portugal, October 2005.

[P9]
R. Heinzl, M. Spevak, P. Schwaha, and T. Grasser. Concepts for High Performance Generic Scientific Computing. Proc. of the MATHMOD Conf., volume 1, page 34 Vienna, Austria, February 2006.

[P10]
M. Spevak, R. Heinzl, P. Schwaha, and T. Grasser. Simulation of Microelectronic Structures using A Posteriori Error Estimation and Mesh Adaptation. Proc. of the MATHMOD Conf., volume 1, page 317, Vienna, Austria, February 2006.

[P11]
M. Spevak, R. Heinzl, P. Schwaha, and T. Grasser. Process and Device Simulation with a Generic Scientific Simulation Environment. Proc. of the Intl. Conf. on Microelectronics, volume 2, pages 475-478, Belgrad, Serbia and Montenegro, April 2006.

[P12]
P. Schwaha, R. Heinzl, W. Brezna, J. Smoliner, H.Enichlmair, R. Minixhofer, and T. Grasser. Leakage Current Analysis of a Real World Silicon-Silicon Dioxide Capacitance. Proc. of the Intl. Caribbean Conf. on Device, Circuits and Systems, pages 365-370, Playa del Carmen, Mexico, April 2006.

[P14]
R. Heinzl, M. Spevak, P. Schwaha, and T. Grasser. Multidimensional and Multitopological TCAD with a Generic Simulation Environment. Proc. of the Intl. Caribbean Conf. on Device, Circuits and Systems, pages 173-176, Playa del Carmen, Mexico, April 2006.

[P15]
R. Heinzl, M. Spevak, and P. Schwaha. A Novel High Performance Approach for Technology Computer Aided Design. Proc. of the Electrical Engineering, Information and Communation Technologies Conf., volume 4, pages 446-450, Brno, Czech Rep., April 2006.

[P16]
R. Heinzl, M. Spevak, P. Schwaha, and T. Grasser A Generic Scientific Simulation Environment for Multidimensional Simulation in the Area of TCAD. Proc. of the NSTI., volume 4, pages 526-529, Boston, USA, May 2006.

[P17]
R. Heinzl, M. Spevak, P. Schwaha, and T. Grasser. High Performance Process and Device Simulation with a Generic Environment. Proc. of the 14th Iranian Conf. on El. Eng. ICEE 2006, pages 446-450, Teheran, Iran, May 2006.

[P18]
A. Sheikholeslami, R. Heinzl, S. Hozler, C. Heitzinger, M. Spevak, M. Leicht. O. Häberlen, J. Fugger, F. Badrieh, F. Parhami, H. Puchner, T. Grasser, and S. Selberherr. Applications of Two- and Three-Dimensional General Topography Simulator in Semiconductor Manufacturing Processes. Proc. of the 14th Iranian Conf. on El. Eng. ICEE 2006, pages 446-450, Teheran, Iran, May 2006.

[P19]
M. Spevak, R. Heinzl, P. Schwaha, and T. Grasser. A Computational Framework for Topological Operations. Proc. of the PARA Conf., page 57, Umea, Sweden, June 2006.
[P20]
R. Heinzl, M. Spevak, P. Schwaha, and T. Grasser. A High Performance Generic Scientific Simulation Environment. Proc. of the PARA Conf., page 61, Umea, Sweden, June 2006.
[P21]
P. Schwaha, R. Heinzl, M. Spevak, and T. Grasser. Advanced Equation Processing for TCAD. Proc. of the PARA Conf., page 64, Umea, Sweden, June 2006.

[P22]
R. Heinzl, P. Schwaha, M. Spevak, and T. Grasser. Performance Aspects of a DSEL for Scientific Computing with C++. Proc. of the Parallel/High Performance Object-Oriented Scientific Computing Conf., pages 37-41, Nantes, France, July 2006.

[P23]
P. Schwaha, R. Heinzl, M. Spevak, and T. Grasser. A Generic Approach to Scientific Computing. Proc. of the Intl. Congress on Computational and Applied Mathematics, page 137, Leuven, Belgium, July 2006.
[P24]
M. Spevak, P. Schwaha, R. Heinzl, and T. Grasser. Automatic Linearization using Functional Programming for Scientific Computing. Proc. of the Intl. Congress on Computational and Applied Mathematics, page 147, Leuven, Belgium, July 2006.
[P25]
M. Spevak, R. Heinzl,P. Schwaha, T. Grasser, and S. Selberherr. A Generic Discretization Library. Proc. of the Object-Oriented Programming Systems, Languages and Applications, pages 95-100, Portland, USA, October 2006.
[P26]
R. Heinzl, M. Spevak, P. Schwaha, and S. Selberherr. A Generic Topology Library. Proc. of the Object-Oriented Programming Systems, Languages and Applications, pages 85-93, Portland, USA, October 2006.
[P27]
R. Heinzl, M. Spevak, P. Schwaha, and S. Selberherr. Performance Analysis for High-Precision Interconnect Simulation. Proc. of the European Sim. and Modelling Conf., pages 113-116, Toulouse, France, October 2006.

[P28]
P. Schwaha, R. Heinzl, G. Mach, C. Pogoreutz, S. Fister, and S. Selberherr. A High Performance Webappliation for an Electro-Biological Problem. Proc. of the European Conf. on Modelling and Sim., pages 218-222, Prague, Czech Republic, June 2007.

[P29]
R. Heinzl, P. Schwaha, C. Giani, and S. Selberherr. Modeling of Non-Trivial Data Structres with a Generic Scientific Simulation Environment. Proc. of the 4th High-End Visualization Workshop, pages 3-11, Tyrol, Austria, June 2007.

[P30]
P. Schwaha, C. Giani, R. Heinzl, and S. Selberherr. Visualization of Polynomials Used in Series Expansion. Proc. of the 4th High-End Visualization Workshop, pages 137-146, Tyrol, Austria, June 2007.

[P31]
W. Benger, G. Ritter, and R. Heinzl. The Concepts of VISH. Proc. of the 4th High-End Visualization Workshop, pages 26-39, Tyrol, Austria, June 2007.

[P32]
R. Heinzl, P. Schwaha, and S. Selberherr. Modern Concepts for High-Performance Scientific Computing. Proc. of the Intl. Conf. on Software and Data Technologies, pages 100-107, Barcelona, Spain, July 2007.

[P33]
P. Schwaha, R. Heinzl, and S. Selberherr. Simulation Methodologies for Scientific Computing. Proc. of the Intl. Conf. on Software and Data Technologies, pages 270-276, Barcelona, Spain, July 2007.

[P34]
R. Heinzl, G. Mach, P. Schwaha, and S. Selberherr. Labtool - A Managing Software for Computer Courses. Proc. of the European Sim. and Modelling Conf., accepted, St. Julian's, Malta, October 2007.

[P35]
R. Heinzl, G. Mach, P. Schwaha, and S. Selberherr. A Performance Test Platform. Proc. of the European Sim. and Modelling Conf., accepted, St. Julian's, Malta, October 2007.

[P36]
P. Schwaha, R. Heinzl, and S. Selberherr. Electro-Biological Simulation using a Web Front-End. Proc. of the European Sim. and Modelling Conf., accepted, St. Julian's, Malta, October 2007.

[P37]
F. Stimpfl, R. Heinzl, P. Schwaha, and S. Selberherr. A Multimode Mesh Generation Approach for Scientific Computing. Proc. of the European Sim. and Modelling Conf., accepted, St. Julian's, Malta, October 2007.


next up previous contents
Next: Curriculum Vitae Up: Dissertation Rene Heinzl Previous: Bibliography

R. Heinzl: Concepts for Scientific Computing