Bibliography

1

D. Adalsteinsson and J. Sethian, ``A Fast Level Set Method for Propagating Interfaces,'' J.Comput.Phys., vol. 118, pp. 269-277, Apr. 1995.

2

J. Sethian and D. Adalsteinsson, ``An Overview of Level Set Methods for Etching, Deposition, and Lithography Development,'' IEEE Trans.Semiconductor Manufacturing, vol. 10, no. 1, pp. 167-184, 1997.

3

Z.-K. Hsiau, E. Kan, J. McVittie, and R. Dutton, ``Robust, Stable, and Accurate Boundary Movement for Physical Etching and Deposition Simulation,'' IEEE Trans.Electron Devices, vol. 44, pp. 1375-1385, Sept. 1997.

4

M. Fujinaga and N. Kotani, ``3-D Topography Simulator (3-D MULSS) Based on a Physical Description of Material Topography,'' IEEE Trans.Electron Devices, vol. 44, no. 2, pp. 226-238, 1997.

5

E. Scheckler and A. Neureuther, ``Models and Algorithms for Three-Dimensional Topography Simulation with SAMPLE-3D,'' IEEE Trans.Computer-Aided Design, vol. 13, no. 2, pp. 219-230, 1994.

6

H. Liao and T. Cale, ``Three-dimensional Simulation of an Isolation Trench Refill Process,'' Thin Solid Films, vol. 236, pp. 352-358, 1993.

7

E. Bär and J. Lorenz, ``3-D Simulation of LPCVD Using Segment-Based Topography Discretization,'' IEEE Trans.Semiconductor Manufacturing, vol. 9, no. 1, pp. 67-73, 1996.

8

T. Smy, L. Tan, K. Chan, R. Tait, J. Broughton, S. Dew, and M. Brett, ``A Simulation Study of Long Throw Sputtering for Diffusion Barrier Deposition into High Aspect Vias and Contacts,'' IEEE Trans.Electron Devices, vol. 45, no. 7, pp. 1414-1425, 1998.

9

R. Hoekstra and M. Kushner, ``Comparison of Two-dimensional and Three-dimensional Models for Profile Simulation of Poly-Si Etching of Finite Length Trenches,'' J.Vac.Sci.Technol.A, vol. 16, no. 6, pp. 3274-3280, 1998.

10

K. Toh, A. Neureuther, and E. Scheckler, ``Algorithms for Simulation of Three-Dimensional Etching,'' IEEE Trans.Computer-Aided Design, vol. 13, no. 5, pp. 616-624, 1994.

11

E. Strasser, Simulation von Topographieprozessen in der Halbleiterfertigung.
Dissertation, Technische Universität Wien, 1994.

12

D. Adalsteinsson and J. Sethian, ``Level Set Methods for Etching, Deposition and Photolithography Development,'' IEEE J.Technology Computer Aided Design, 1997.
http://www.ieee.org/products/online/journal/tcad/accepted/sethian-aug97/.

13

C. Giardina and E. Dougherty, Morphological Methods in Image and Signal Processing.
New Jersey: Prentice-Hall, 1988.

14

E. Strasser, G. Schrom, K. Wimmer, and S. Selberherr, ``Accurate Simulation of Pattern Transfer Processes Using Minkowski Operations,'' IEICE Trans.Electron., vol. E77-C, no. 2, pp. 92-97, 1994.

15

R. Martins, W. Pyka, R. Sabelka, and S. Selberherr, ``High-Precision Interconnect Analysis,'' IEEE Trans.Computer-Aided Design, vol. 17, no. 11, pp. 1148-1159, 1998.

16

R. Sabelka, R. Martins, and S. Selberherr, ``Accurate Layout-Based Interconnect Analysis,'' in Simulation of Semiconductor Processes and Devices (K. D. Meyer and S. Biesemans, eds.), pp. 336-339, Leuven, Belgium: Springer, 1998.

17

E. Strasser and S. Selberherr, ``Algorithms and Models for Cellular Based Topography Simulation,'' IEEE Trans.Computer-Aided Design, vol. 14, no. 9, pp. 1104-1114, 1995.

18

A. Myers, J. Doyle, and J. Abelson, ``Monte Carlo Simulations of Magnetron Sputtering Particle Transport,'' J.Vac.Sci.Technol.A, vol. 9, no. 3, pp. 614-618, 1991.

19

W. Pyka and S. Selberherr, ``Three-Dimensional Simulation of TiN Magnetron Sputter Deposition,'' in 28th European Solid-State Device Research Conference (A. Touboul, Y. Danto, J.-P. Klein, and H. Grünbacher, eds.), (Bordeaux, France), pp. 324-327, Editions Frontieres, 1998.

20

W. Pyka and S. Selberherr, ``Three-Dimensional Simulation of Bulge Formation in Contact Hole Metalization,'' in Proc. International Conference on Modeling and Simulation of Microsystems Semiconductors, Sensors and Actuators, (Santa Clara, CA, USA), pp. 65-69, Apr. 1998.

21

H. Kirchauer and S. Selberherr, ``Three-Dimensional Photolithography Simulation,'' IEEE J.Technology Computer Aided Design, 1997.
http://www.ieee.org/products/online/journal/tcad/accepted/kirchauer-jun97/.

[<] [^] [>] [TOC] Prev: 6 Acknowledgment Up: Pyka et al.: Optimized